Face masks to prevent breathing in mould spores - a review

Aspergillus spores are very very small - 2-3 microns is a reasonable size estimate for an Aspergillus spore. The function of these spores is to be released into the air and to resettle some distance from the original fungal growth and then grow, the purpose being to spread the fungus far and wide. After millions of years of evolution fungal spores have got to be extremely good at this - the spores are very small and float in air at the slightest encouragement from air currents. Consequently the air we all breathe every day contains fungal spores.

Most people have a highly efficient immune sytem that removes fungal spores from the lungs, so those that are breathed in are quickly destroyed, however some people may develop an allergic reaction and others are vulnerable to infection (e.g. those with an imparied immune system such as after a transplant or during treatment for some types of cancer).

There have been a few rare cases of (apparently) completely healthy people accidentally breathing in huge numbers of spores - the lastest was a healthy 40 year old man who opened bags of composted plant material which must have blown clouds of mould into his face (News story). He became very ill within a day or two and died.

There is therefore reasonable that awareness of the risks of breathing in fungal spores is important and the message needs to be spread far and wide.

Clearly the best way to avoid health problems is to remove the source of the problem - in this case avoid situations where you are exposed to high numbers of spores. Unfortunately that is not always possible - the source might be part of your daily life or your work (e.g. if you are a gardener or agricultural worker).

Alternative include:

  • Adjust your living or working practices to minimise exposure to mold spores
  • Use protective barrier equipment to prevent spores being breathed in e.g. face masks
  • Filter all of the air surrounding the vulnerable individual (only viable for quite small enclosed areas e.g. surgical operating theatres and required powerful expensive equipment)

Face masks represent the most cost effective solution if an individual must breathe in air that contains a lot of spores. They are light and relatively cheap while not being too obtrusive to the user.

Which Face Mask to use?

There are a huge range of masks and filtration material available on the market - traditionally aimed at the industrial and medical protection markets but now increasingly available to the domestic user. Fortunately for simplicity the vast majority are useless at filtering out the tiny fungal spores as they are too small to be stopped. A cheap paper mask sold at your local DIY store to prevent dust inhalation is far too coarse to filter out mould spores - we can concentrate on filters that remove particles 2 microns in diameter and those are a little harder to come by.

Any filter that you intend for use to prevent exposure to fungal spores must be graded as a HEPA filter. There are three grades of HEPA filters namely N95, N99 and N100 and the numbers refer to the percent of particles 0.3micron in size that filter is capable of removing from air that passes through it.

An N95 filter will therefore remove 95% of all particles 0.3 micron in size from air that passes through it. Fungal spores are 2-3 microns in size so an N95 filter will remove far more than 95% of fungal spores from the air, though some will still get through. This standard is generally thought to be the best combination of efficiency and cost for the average home user - such as a gardener. Industrial users (e.g. workers remediating mouldy homes or other premises) may be exposed to far more spores and may opt for the more efficient N99 or N100 filters at higher cost.

In the UK and europe the standards referred to are FFP1 (not appropriate for this purpose), FFP2 and FFP3. FFP2 is equivalent to N95 and FFP3 offers higher protection. Masks generally cost £2-3 each and are intended for single use. More expensive masks are available which can be used more than once - see 3M for one possible supplier.

These masks must be correctly fitted to work to their full potential so be sure to follow instructions carefully. Guidelines for employers are given here and we have an illustrated guide at: http://www.aspergillus.org.uk/newpatients/leaflets/Facemasksfitting&suppliers.pdf

Industrial users are often advised to wear a full face mask including eye protection (to prevent eye irritation) and to use an additional filter to remove the chemical gases given off by moulds (VOC's), but this is mainly for people being heavily exposed to clouds of spores day after day.

USA

UK

back

Disclaimer | Privacy/Confidentiality | Cookies | Terms and Conditions | Advertising
This page was created by Dr Graham Atherton PhD on October 19th 2008
This page was last modified: July 29 2011 10:06:10.
Maintained by Aspergillus Website Team